2004-2010 Kawasaki KX250FMaintenance schedule

Motocross - 250cc four-stroke

Scheduled against races ridden or engine run-time hours, whichever comes first.

Verified

Every interval on this page was read directly from the OEM chart.

Open the hour meter tool

Intervals

  • Each race or 2.5 hours
  • Every 3 races or 7.5 hours
  • Every 6 races or 15 hours
  • Every 12 races or 30 hours

Full schedule (42 items)

2004-2010 Kawasaki KX250F scheduled maintenance items and intervals
ItemActionInterval
Air cleaner element – clean
Clean
Every 2.5 hrs
Brake adjustment – inspect †
Inspect
Every 2.5 hrs
Brake fluid level – inspect †
Inspect
Every 2.5 hrs
Brake pad wear – inspect †
Inspect
Every 2.5 hrs
Breather hose – inspect
Inspect
Every 2.5 hrs
Carburetor – inspect and adjust
Adjust
Every 2.5 hrs
Clutch – adjust
Adjust
Every 2.5 hrs
Coolant – check †
Inspect
Every 2.5 hrs
Drive chain wear – inspect †
Inspect
Every 2.5 hrs
Engine sprocket – inspect †
Inspect
Every 2.5 hrs
Frame – inspect
Inspect
Every 2.5 hrs
I Spoke tightness and rim runout – inspect †
Inspect
Every 2.5 hrs
Kick pedal and shift pedal – clean
Clean
Every 2.5 hrs
N Hot start – adjust
Adjust
Every 2.5 hrs
Radiator hoses and connections – inspect †
Inspect
Every 2.5 hrs
Rear sprocket – inspect †
Inspect
Every 2.5 hrs
S Brake hoses, connections - inspect †
Inspect
Every 2.5 hrs
Silencer – clean and inspect†
Clean
Every 2.5 hrs
Spark plug – clean, gap †
Clean
Every 2.5 hrs
Throttle cable – adjust
Adjust
Every 2.5 hrs
Wheel bearing – inspect †
Inspect
Every 2.5 hrs
Wheels/tires – inspect
Inspect
Every 2.5 hrs
Cable – inspect
Inspect
Every 7.5 hrs
Clutch and friction plates - inspect †
Inspect
Every 7.5 hrs
Front fork – inspect and clean
Clean
Every 7.5 hrs
Fuel hose, connections - inspect †
Inspect
Every 7.5 hrs
Nuts, bolts, fasteners – inspect †
Inspect
Every 7.5 hrs
Steering play – inspect †
Inspect
Every 7.5 hrs
Crankshaft – inspect
Inspect
Every 15 hrs
E Cylinder head, cylinder – inspect
Inspect
Every 15 hrs
Engine Oil – change
Replace
Every 15 hrs
I Valve clearance – inspect †
Inspect
Every 15 hrs
Oil filter – replace
Replace
Every 15 hrs
Oil screen – clean
Clean
Every 15 hrs
Piston and piston ring – replace
Replace
Every 15 hrs
Silencer packing – change
Replace
Every 15 hrs
Swingarm and Uni-Trak linkage pivots –
Inspect
Every 15 hrs
Swingarm and Uni-Trak linkage pivots –
Inspect
Every 15 hrs
Front fork oil – change
Replace
Every 30 hrs
Piston pin – replace
Replace
Every 30 hrs
Rear shock oil – replace
Replace
Every 30 hrs
Steering stem bearing – grease
Lubricate
Every 30 hrs

Every row above is factory schedule, straight from the chart. Intervals are shown in hrs.

Legend

  • periodicServiced at this interval (marked in the OEM chart)

From the manual

  • Maintenance must be done in accordance with this chart to keep the motorcycle in good running condition.
  • Items marked with a dagger in the manual require more mechanical skill; Kawasaki recommends a dealer perform them.
Source: Kawasaki KX250F Service Manual (P/N 99924-1324-02) · Chart read from the 2005 manual. Intervals change between model years — confirm against yours.

Always confirm intervals, torque specs and part numbers against your own service manual. This site is a shopping aid, not a repair manual.

Open the hour meter tool